Hey - Thanks for visiting. I work hard on this site - trying to bring you the best of everything guitar related. It is a work in progress. Please Contact Me with any thoughts, ideas, requests, etc. and be sure to "like" "pin" "bookmark" "tweet" and anything else you like to do by using the social share buttons above - or follow us by using the social buttons below. Thanks again.
Is a really bad idea to give more radius to the fretwire than the fretboard for more stability in the corners, the thing is when you apply radius to the wire preview to instal the fret act as a spring so doesn't matter the fretwire get tight to the fretboard the wood contract and expand depends humidity and temperature so when expand the fret moves slightly from the slot, the best way is using an arbor press and giving the exact radius to the wire of the fretboard previews instal, that way doesn't matter the wood expand the fret will stay intact with no spring effect, I have 40 years making professional guitars and never received any guitar with buzzings no matter how long I made it
Why u not cut the edge of fret before place that to freet board, that will damaged the board, wtf
What is the point of the red marker?
Me: buys a new guitar neck to finally get a rosewood one instead of maple
a master at work
7 raps with a hammer,7 flat spots. Hahah
Are there any other materials can be use as frets?
Лады еше минимум на 2 раза шлифовки. зачем так рано менять?
Tip: Cut the tangs of the end of the frets before you set them in it'll make your life easier
Should mask finger board before buffing to avoid introducing darkened compound to bare wood.
I need a guitar doctor like you😁💓
Don't fret my dear….it looks great.
Do you ise a fret press or just hammered it?
Beautiful, well done.
Where in from thats a “frets at 90% of life”
That girl knows what she's doin ❤🎉
Is a really bad idea to give more radius to the fretwire than the fretboard for more stability in the corners, the thing is when you apply radius to the wire preview to instal the fret act as a spring so doesn't matter the fretwire get tight to the fretboard the wood contract and expand depends humidity and temperature so when expand the fret moves slightly from the slot, the best way is using an arbor press and giving the exact radius to the wire of the fretboard previews instal, that way doesn't matter the wood expand the fret will stay intact with no spring effect, I have 40 years making professional guitars and never received any guitar with buzzings no matter how long I made it
Always great video shorts and vids. Hope you’re well!!
why did you saw into the binding…
❤❤❤❤❤❤
Y ese asmr?~