web analytics

How to refret guitar

Thanks! Share it with your friends!

Close

A proper way to refret a guitar neck
☕️ My Ko-fi:
https://ko-fi.com/shpachuk

Jake

Hey - Thanks for visiting. I work hard on this site - trying to bring you the best of everything guitar related. It is a work in progress. Please Contact Me with any thoughts, ideas, requests, etc. and be sure to "like" "pin" "bookmark" "tweet" and anything else you like to do by using the social share buttons above - or follow us by using the social buttons below. Thanks again.

More Posts - Website

Follow Me:
TwitterFacebookPinterestGoogle PlusYouTube

Comments

@gumoza7sins816 says:

Why u not cut the edge of fret before place that to freet board, that will damaged the board, wtf

@jennasnyder9885 says:

What is the point of the red marker?

@Z3b_Gu1tars says:

Me: buys a new guitar neck to finally get a rosewood one instead of maple

@princessalaina4589 says:

a master at work

@JerryWhite-ee5hy says:

7 raps with a hammer,7 flat spots. Hahah

@pngaroweculture-p8f says:

Are there any other materials can be use as frets?

@Александр-и7ф1х says:

Лады еше минимум на 2 раза шлифовки. зачем так рано менять?

@spacecoasttactical says:

Tip: Cut the tangs of the end of the frets before you set them in it'll make your life easier

@dkinney1000 says:

Should mask finger board before buffing to avoid introducing darkened compound to bare wood.

@Charitthakur says:

I need a guitar doctor like you😁💓

@Myhousedrinkingbeer says:

Don't fret my dear….it looks great.

@mirarzaamplification902 says:

Do you ise a fret press or just hammered it?

@wkmetaal says:

Beautiful, well done.

@losangulos says:

Where in from thats a “frets at 90% of life”

@JuliaBryant-g2m says:

That girl knows what she's doin ❤🎉

@MikeNavarroNSP says:

Is a really bad idea to give more radius to the fretwire than the fretboard for more stability in the corners, the thing is when you apply radius to the wire preview to instal the fret act as a spring so doesn't matter the fretwire get tight to the fretboard the wood contract and expand depends humidity and temperature so when expand the fret moves slightly from the slot, the best way is using an arbor press and giving the exact radius to the wire of the fretboard previews instal, that way doesn't matter the wood expand the fret will stay intact with no spring effect, I have 40 years making professional guitars and never received any guitar with buzzings no matter how long I made it

@walther9161 says:

Always great video shorts and vids. Hope you’re well!!

@putchmillernetwork1799 says:

why did you saw into the binding…

@azizslow1739 says:

❤❤❤❤❤❤

@SinNombreDYT says:

Y ese asmr?~

Reply to @Myhousedrinkingbeer Cancel reply

*